| Rolling Mills 24032S.523823 BEARINGS FOR METRIC AND INCH SHAFT SIZES | L:129 mm; A2:30 mm; N2:37 mm; Designation of bearing:UC207-23G2T04; L2:13 mm; L1:78 mm; A:37 mm; Designation of housing:T207N-; SW:3.97 mm; T max.:100 °C; |
| FAG 517740 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Manufacturer Name:NTN; d:55 mm; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:7.82 Hz; da max:69 mm; Da max:111 mm; Mass (without HJ ring):1.44 kg; Dynamic load, C:137 kN; Characteristic outer ring frequency, BPF0:5.18 Hz; Nlim (oil):6,300 rpm; |
| Rolling Mills 22207E BEARINGS FOR METRIC AND INCH SHAFT SIZES | Max. Allowed rpm(rpm):24000; Outer Ring Shape:Flat; Torque Symbol:No; Seal, Shield Symbols:VV; Basic Load Rating, Static Rating(N):2390; Number of Raceway Ring Rows:Single Row; Internal Symbol:No; Type:Ball; Load Direction:Radial; Acoustic Symbol:No; |
| Rolling Mills 24140B.541020 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Precision Class:ISO P4S (ABEC 7/9); do - Ball Diameter:6.350 mm; Limiting Speed (Grease):27480 rpm; Design Units:METRIC; R - Inner Ring To Clear Radius2:0.6 mm; Cage Type:CR - Phenolic Outer; Ce - Dynamic Radial Rating1:11700 N; Bearing Width:12 mm; Limiting Speed (Oil):54960 rpm; C0 - Static Radial Rating:6670 N; |
| Rolling Mills 56204.012 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Volume Discount:Available; Shape:Flange Type; Holder Surface Treatment:Electroless Nickel P; Width T(mm):8; Flange Shape:Compact Type; Bearing Part Number:698; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; RoHS:6; |
| Rolling Mills 16205.013 BEARINGS FOR METRIC AND INCH SHAFT SIZES | db - Cone Backface Backing Diameter:13.62 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:138000 lbf; Series:HM959700; C1 - Dynamic Radial Rating (1 million revolutions)1:305000 lbf; da - Cone Frontface Backing Diameter:13.62 in; Ab - Cage-Cone Frontface Clearance:-0.46 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:532000 lbf; R - Cone Frontface To Clear Radius2:0.250 in; |
| Rolling Mills 577881 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Days to Ship:7 Days; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Shape:Flange Type; Type:Bearings with Housin; Width T(mm):35; |
| Rolling Mills 802090M BEARINGS FOR METRIC AND INCH SHAFT SIZES | C0:29.2 kN; A1:13 mm; d:55.56 mm; A4:30 mm; J:150 mm; A:42 mm; Designation of housing:FC211N-; L:185 mm; Recommended tightening torque for set screw:8 Nm; S:11.8 mm; |
| Rolling Mills 16212.207 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Flange O.D. H(φ):50; Volume Discount:Available; Bearing Part Number:6000; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Shape:Flange Type; Width T(mm):21; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Not Provided; |
| Rolling Mills 572151 BEARINGS FOR METRIC AND INCH SHAFT SIZES | A:64 mm; Designation of bearing:UC211-34G2T20; S:22.2 mm; L1:106 mm; s1:27.8 mm; N2:64 mm; d:53.98 mm; A1:22 mm; Weight:3.87 kg; Recommended tightening torque for set screw:16.8 Nm; |
| FAG 517679 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Da - Cup Frontface Backing Diameter:6.73 in; D:7.1250 in; Db - Cup Backface Backing Diameter:5.98 in; Series:H917800; e - ISO Factor2:0.73; Y - ISO Factor3:0.82; r - Cup Backface To Clear Radius1:0.130 in; Cg - Geometry Factor:0.112; Design Units:Imperial; Cup Part Number:H917810; |
| Rolling Mills 514278A BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bearing I.D. d(mm):30; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; RoHS:6; Housing Material:1045 Carbon Steel; |