| Rolling Mills 22212EK BEARINGS FOR METRIC AND INCH SHAFT SIZES | Accessory:No Cover; Basic Load Rating, Dynamic Rating(N):19500; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Diameter series symbol:Used for Light load; Bearing Unit, Type:Pillow Type; Fit:J7; Unit Body Material:Cast Iron; Pillow Type, Category:Standard; Surface Treatment:No; |
| Rolling Mills 579703 BEARINGS FOR METRIC AND INCH SHAFT SIZES | da min:33 mm; D:58 mm; da max:35.5 mm; b max:1.65 mm; Brand:NTN; Dynamic load, C:17.9 kN; rs min:1 mm; Da max:53 mm; rNa max:0.5 mm; Db min:64.5 mm; |
| Rolling Mills 579741 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Designation of housing:FL211-; d1:74.5 mm; A2:68.6 mm; T min.:-40 °C; B1:71.3 mm; Recommended tightening torque for set screw:16.8 Nm; T max.:100 °C; Designation of bearing:EX211-34G2T04; S:27.7 mm; d:53.98 mm; |
| Rolling Mills 36212 BEARINGS FOR METRIC AND INCH SHAFT SIZES | d1:20.15 mm; Characteristic outer ring frequency, BPF0:5.48 Hz; Nlim (oil):83,000 rpm; D6:21.6 mm; Dynamic load, C:3.25 kN; da min:17.5 mm; Axial displacement K Factor:1.14; Characteristic rolling element frequency, BSF:5.63 Hz; ra max:0.3 mm; Preload value:0.08 kN; |
| Rolling Mills 24060B.531119 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Rolling Element Material:Steel; Size Standards:Metric System; Bearing Style:Open Type; Preload Mark:/GN; RoHS:6; Type:Angular Contact Ball; Combination symbol:G; Types:Bearing for the main; Contact angle symbol:C; Number of Raceway Ring Rows:Single Row; |
| Rolling Mills 22234E BEARINGS FOR METRIC AND INCH SHAFT SIZES | D - Bearing O.D.:5.0000 in; R - Fillet Radius Shaft (Max):0.03 in; d - Bore Diameter:3.8750 in; Steering Pivot Rating:9700 lbf; Weight:1.1 lb; B:0.7650 in; Bearing Type:Thrust Tapered Rolle; Oil Holes in Retainer:Yes; |
| FAG 503745 BEARINGS FOR METRIC AND INCH SHAFT SIZES | D:80; Load Direction:Radial / Thrust; d:40; Revolution Frequency(rpm):4600; Number of Raceway Ring Rows:Single Row; B:32; Raceway Ring Shape:Tapered Roller; Outer Ring Type:Flat; Specifications/Environment:Standard; |
| Rolling Mills 580798 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Basic Dynamic Load Rating(N):60500; Low Torque Specification:No; Load Direction:Radial; Holder Symbol:No; D:145; Rubugado Symbol:No; Torque Symbol:No; Symbol of Bearing Ring Shape:No; Retainer Type:Punching; Internal Symbol:No; |
| Rolling Mills 56209 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Housing Material:A2017; Number of pc(s). included in pkg.:2 Pieces Per Package; Type:Bearing holder set,; Days to Ship:20 Days; Bearing Retained:No; Bearing Type:Deep Groove Ball Bea; Surface Treatment:No; Width T(mm):48; |
| Rolling Mills 24140B.M BEARINGS FOR METRIC AND INCH SHAFT SIZES | H:117 mm; C:31.85 kN; G:M6x1; d:42.86 mm; Weight:2.4 kg; T min.:-20 °C; B:41.2 mm; L1:87 mm; C0:20.8 kN; N:29mm; |
| Rolling Mills 578243 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Ca90 - Dynamic Thrust Rating (90 million revolutions)7:34800 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:58700 lbf; R - Cone Backface To Clear Radius3:0.06 in; C1 - Dynamic Radial Rating (1 million revolutions)6:226000 lbf; B - Cone Width:3.4375 in; d:6.4995 in; Cg - Geometry Factor:0.127; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:394000 lbf; db - Cone Backface Backing Diameter:7.36 in; |
| FAG 567622 BEARINGS FOR METRIC AND INCH SHAFT SIZES | L:97 mm; C:14 kN; C0:7.88 kN; Z:16.7 mm; Recommended tightening torque for set screw:3.7 Nm; A:32 mm; T max.:200 °C; Designation of housing:T205N-; G:M6x1; H1:76 mm; |