No. | Brand | N | E | d | r | Z | B | S | m |
56205.015 | Rolling Mills | - | 25 mm | - | - | - | - | - | - |
537406 | Rolling Mills | - | 18 mm | 28.58 mm | - | 51.8 mm | - | - | - |
NNU4922S.M.P53 | FAG | - | - | - | - | - | - | - | - |
578243 | Rolling Mills | - | - | 6.4995 in | - | - | - | - | - |
802055 | Rolling Mills | - | - | - | - | - | - | - | - |
802137.H122AA | Rolling Mills | - | - | - | - | - | - | - | - |
534470 | Rolling Mills | - | - | - | - | 32 mm | 49.2 mm | - | - |
16205.015 | Rolling Mills | - | - | - | - | - | - | - | - |
522009 | FAG | - | - | - | - | - | - | - | - |
802111 | Rolling Mills | - | - | - | - | - | 20 mm | - | - |
575937 | Rolling Mills | - | - | - | - | - | - | - | - |
524229 | FAG | - | - | - | - | - | - | - | - |
568450 | FAG | - | - | - | - | - | - | - | - |
22316EK | Rolling Mills | - | - | - | - | - | - | - | - |
16209 | Rolling Mills | - | - | - | - | - | - | - | - |
512525A | Rolling Mills | - | - | - | - | - | - | 11 mm | - |
539205 | Rolling Mills | - | - | - | - | - | - | - | - |
22319E.T41A | Rolling Mills | - | - | - | - | - | - | - | - |
NNU4938S.M.P53 | FAG | - | - | - | - | - | - | - | - |
22205E | Rolling Mills | - | - | - | - | - | - | - | - |
545467 | FAG | - | - | 80 | - | - | - | - | - |
61934.C3 | FAG | - | - | - | - | - | - | - | - |
515917A | Rolling Mills | - | - | - | - | - | - | - | - |
24032S.M | Rolling Mills | - | - | - | - | - | - | - | - |
22212EK | Rolling Mills | - | - | - | - | - | - | - | - |
22230EK | Rolling Mills | 25mm | - | 70 mm | - | - | 68.3 mm | 34.2 mm | - |
Rolling Mills 579097 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Recommended tightening torque for set screw:8 Nm; T max.:100 °C; G:M6x1; C0:11.2 kN; Designation of bearing:EX206-18G2L3; A3:1.5 mm; H:85 mm; s1:34.1 mm; S:18.2 mm; d:28.58 mm; |
Rolling Mills 36209 BEARINGS FOR METRIC AND INCH SHAFT SIZES | e - ISO Factor8:0.42; B:24.750 mm; Design Units:METRIC; Ab - Cage-Cone Frontface Clearance:3.8 mm; Y - ISO Factor9:1.43; G2 - Heat Generation Factor (Rib-Roller End):17.2; r - Cup Backface To Clear Radius2:1.52 mm; Cage Type:Stamped Steel; C90 - Dynamic Radial Rating (90 million revolutions)4:25900 N; K - Factor7:1.39; |
FAG 507344 BEARINGS FOR METRIC AND INCH SHAFT SIZES | T min.:-20 °C; SW:6 mm; d:85 mm; r:2; Weight:3.38 kg; B:85.7 mm; T max.:200 °C; S:34.1 mm; m:14 mm; C0:63.8 kN; |
Rolling Mills 36209.11 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Surface Treatment:No; Unit Body Material:Shaped steel/Groove-; Fit:J7; Bearing Unit, Type:Take-Up Type; Accessory:No Cover; Seal:Nitrile; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):36200; |
FAG 560371 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bearing Part Number:6904; Housing Material:[Aluminum Alloy] Alu; Type:Bearings with Housin; Days to Ship:8 Days; Shape:T-Shaped; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; C Chamfered:Not Provided; |
FAG 619/710MB.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Da - Cup Frontface Backing Diameter:288.50 mm; a - Effective Center Location3:-8.1 mm; Design Units:Imperial; Y - ISO Factor9:1.29; Aa - Cage-Cone Backface Clearance:12.7 mm; d:159.918 mm; db - Cone Backface Backing Diameter:201.93 mm; Bearing Weight:27.200 Kg; e - ISO Factor8:0.46; Cg - Geometry Factor:0.126; |
Rolling Mills NNU4984S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Volume Discount:Available; Type:Bearings with Housin; Seals:ZZ (Double Shield); Number of Bearings:Single; Bearing Material:Stainless Steel; |
Rolling Mills 574663 BEARINGS FOR METRIC AND INCH SHAFT SIZES | RoHS:6; Housing Material:A2017; Bearing Retained:No; Main Body Shape:T Type; Type:Bearing holder set,; Surface Treatment:No; Width T(mm):38; Number of Bearings:Single; |
FAG NNU4938S.M.P53 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Manufacturer Name:NTN; Da max:502 mm; Characteristic rolling element frequency, BSF:9.5 Hz; Characteristic inner ring frequency, BPFI:14.32 Hz; Radial clearance class:C3; Min operating temperature, Tmin:-40 °C; k:16 mm; Y0:1.94; Category:Bearings; b:27 mm; |
Rolling Mills 22324EK.T41A BEARINGS FOR METRIC AND INCH SHAFT SIZES | d:44.45 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:93.5 kN; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:15.2 kN; a:25.56 mm; Y0:0.6; Characteristic cage frequency, FTF:0.43 Hz; Characteristic outer ring frequency, BPF0:7.8 Hz; B:29.37 mm; |
FAG NNU4932S.M.P53 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Shaft Size :5 in; Pre Install Clearance Min:0.0063 in; Dimension E:7.000 in; Oil Lubrication - T Seal:1200 rpm; Y1 - Geometry Factor:2.62; Housing Style:Four-Bolt Square Fla; Weight:115 lb; Dimension L Fix:3.32 in; UPC Code:0883450338905; Shaft Tolerance:0.0050 in; |
Rolling Mills 525652V BEARINGS FOR METRIC AND INCH SHAFT SIZES | Volume Discount:Available; RoHS:6; Shape:Flange Type; Bearing Retained:Yes (with retaining; Seals:DD (Contact Rubber S; Days to Ship:7 Days; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Width T(mm):35; |
Rolling Mills 802057M.H122AA BEARINGS FOR METRIC AND INCH SHAFT SIZES Video