| FAG NNU49/630S.M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | A:30 mm; T max.:200 °C; H:30.2 mm; H1:10 mm; Weight:0.4 kg; s1:11 mm; S:6 mm; C:9.55 kN; Designation of housing:PE203-; L:125 mm; |
| FAG 561221 BEARINGS FOR METRIC AND INCH SHAFT SIZES | T min.:-20 °C; A:32.1 mm; S:15.9 mm; Designation of housing:FLE206N-; N:11,5mm; Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; e:19 mm; Dz:70 mm; d:28.58 mm; |
| FAG 579578 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Shape:T-Shaped; Height H(mm):30 ～ 60; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; C Chamfered:Provided; Number of Bearings:Single; Type:Bearings with Housin; Width T(mm):15; |
| Rolling Mills 802104 BEARINGS FOR METRIC AND INCH SHAFT SIZES | rs min:1.5 mm; r1a max:1.5 mm; Mass:0.55 kg; Characteristic cage frequency, FTF:0.45 Hz; Brand:SNR; Dynamic load, C:80.2 kN; Cb min:5.5 mm; Nlim:7,700 rpm; Characteristic rolling element frequency, BSF:8.94 Hz; Min operating temperature, Tmin:-40 °C; |
| Rolling Mills 802100 BEARINGS FOR METRIC AND INCH SHAFT SIZES | B:34 mm; S:14.3 mm; C:14 kN; Weight:0.63 kg; N:16mm; T max.:100 °C; Z:39.6 mm; Dz:60 mm; G:M6x1; C0:7.88 kN; |
| FAG 532001 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Holder Surface Treatment:Black Oxide Coating; Flange O.D. H(φ):114; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Seals:VV (Non-Contact Rubb; Bearing Material:[Steel] Steel; |
| Rolling Mills 573689 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Load Direction:Radial; Spacer, Sleeve symbol:H; Specifications, Environment:Standard; Combination symbol:No; Clearance sign:CN (standard); Torque Symbol:No; Rolling Element Material:Stainless Steel; Type:Ball; Internal Symbol:No; Basic Load Rating, Static Rating(N):3750; |
| Rolling Mills 800942 BEARINGS FOR METRIC AND INCH SHAFT SIZES | A1:32 mm; A:48 mm; J:95.3 mm; d:41.28 mm; T max.:100 °C; N:M12; G:R1/8"; s1:24.6 mm; E:15 mm; B:49.2 mm; |
| Rolling Mills 573917 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Dynamic load, C:1,490 kN; Y0:2.26; Y1:2.32; Mass:27.3 kg; da min:194 mm; Static load, C0:1,960 kN; B:96 mm; ra max:2.5 mm; e:0.29; Brand:SNR; |
| Rolling Mills 577243 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Max operating temperature, Tmax:200 °C; Radial clearance class:C3; Y0:2.04; Characteristic inner ring frequency, BPFI:8.4 Hz; Y2:3.11; Da max:226 mm; d:110 mm; rs min:3 mm; Dynamic load, C:975 kN; Fatigue limit load, Cu:84.5 kN; |
| Rolling Mills 24032S.523823 BEARINGS FOR METRIC AND INCH SHAFT SIZES | L:129 mm; A2:30 mm; N2:37 mm; Designation of bearing:UC207-23G2T04; L2:13 mm; L1:78 mm; A:37 mm; Designation of housing:T207N-; SW:3.97 mm; T max.:100 °C; |
| Rolling Mills 1 6205 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Characteristic cage frequency, FTF:0.41 Hz; Characteristic inner ring frequency, BPFI:5.92 Hz; Characteristic rolling element frequency, BSF:5.26 Hz; Da max:102 mm; Mass:0.78 kg; f0:14.3; B:22 mm; Min operating temperature, Tmin:-20 °C; Brand:NTN; d:60 mm; |