| FAG 61960M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Width T(mm):10; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Number of Bearings:Single; Flange Shape:Compact Type; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Volume Discount:Available; Seals:VV (Non-Contact Rubb; |
| Rolling Mills 577881 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Days to Ship:7 Days; Holder Surface Treatment:Electroless Nickel P; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Shape:Flange Type; Type:Bearings with Housin; Width T(mm):35; |
| Rolling Mills 36212 BEARINGS FOR METRIC AND INCH SHAFT SIZES | d1:20.15 mm; Characteristic outer ring frequency, BPF0:5.48 Hz; Nlim (oil):83,000 rpm; D6:21.6 mm; Dynamic load, C:3.25 kN; da min:17.5 mm; Axial displacement K Factor:1.14; Characteristic rolling element frequency, BSF:5.63 Hz; ra max:0.3 mm; Preload value:0.08 kN; |
| Rolling Mills 24140B.M BEARINGS FOR METRIC AND INCH SHAFT SIZES | H:117 mm; C:31.85 kN; G:M6x1; d:42.86 mm; Weight:2.4 kg; T min.:-20 °C; B:41.2 mm; L1:87 mm; C0:20.8 kN; N:29mm; |
| Rolling Mills 802057M.H122AA BEARINGS FOR METRIC AND INCH SHAFT SIZES | Static load, C0:87 kN; rs min:1.1 mm; D1:73.3 mm; Brand:SNR; Min operating temperature, Tmin:-20 °C; F:54.5 mm; Characteristic outer ring frequency, BPF0:6.24 Hz; Dynamic load, C:77.7 kN; Fatigue limit load, Cu:10.6 kN; r1s min:1.1 mm; |
| Rolling Mills 509391 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Volume Discount:Available; Width T(mm):45; Holder Surface Treatment:Clear Anodize; Bearing Material:[Steel] Steel; |
| Rolling Mills 577243 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Max operating temperature, Tmax:200 °C; Radial clearance class:C3; Y0:2.04; Characteristic inner ring frequency, BPFI:8.4 Hz; Y2:3.11; Da max:226 mm; d:110 mm; rs min:3 mm; Dynamic load, C:975 kN; Fatigue limit load, Cu:84.5 kN; |
| Rolling Mills 22309EK BEARINGS FOR METRIC AND INCH SHAFT SIZES | N:M8; T min.:-20 °C; E:16 mm; C:12.8 kN; H:33.3 mm; d:15 mm; A:38 mm; A1:20 mm; S:17 mm; C0:6.65 kN; |
| Rolling Mills 22205E BEARINGS FOR METRIC AND INCH SHAFT SIZES | Maximum Speed:4630 rpm; Shaft Size:1-15/16 in; Dimension A:5.0 in; Dimension P:0.6 in; Seal Type:High Temperature Pac; Dimension B:4.5 in; Cr - Dynamic Load Rating:18659 lbf; Dimension S:1.1 in; Bearing Type:Split Cylindrical Re; Dimension D:7.0 in; |
| Rolling Mills 578647 BEARINGS FOR METRIC AND INCH SHAFT SIZES | H1:19 mm; T max.:100 °C; T min.:-20 °C; d1:52 mm; H:47.6 mm; Designation of housing:PE207-; J:126 mm; H2:93 mm; Adapter sleeve reference:HLK2307; B1:34 mm; |
| Rolling Mills 802047.H122AA BEARINGS FOR METRIC AND INCH SHAFT SIZES | C:35.1 kN; L:149 mm; A1:16 mm; Designation of open end cover:SCOU210-31; L3:86 mm; Z:74.6 mm; N:29mm; N2:49 mm; Designation of housing:T210N-; Designation of bearing:US210-31G2T20; |
| Rolling Mills 515917A BEARINGS FOR METRIC AND INCH SHAFT SIZES | D:210.000 mm; Db - Cup Backface Backing Diameter:197.10 mm; db - Cone Backface Backing Diameter:163.07 mm; Ab - Cage-Cone Frontface Clearance:3.8 mm; Bearing Weight:4 Kg; C0 - Static Radial Rating:573000 N; a - Effective Center Location3:-1.5 mm; Design Units:METRIC; B - Cone Width:38.000 mm; G2 - Heat Generation Factor (Rib-Roller End):157.2; |