| Rolling Mills 22213EK BEARINGS FOR METRIC AND INCH SHAFT SIZES | Retainer Type:Punching; Low Torque Specification:No; Outer Ring:With Outer Ring; Clearance sign:No; Specifications:Standard; Days to Ship:6 Days or more; Inner/Outer Ring Material:Steel; Bearing Ring Type:Type NJ; Size Standards:Metric System; |
| Rolling Mills 22330E BEARINGS FOR METRIC AND INCH SHAFT SIZES | Designation of housing:PEX13-14-; H:88.9 mm; C0:49.5 kN; L1:92 mm; B:77.8 mm; A:88.9 mm; G:R1/8"; d:70 mm; S:33.3 mm; J:230.8 mm; |
| Rolling Mills 565906 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bearing Part Number:6003; Flange O.D. H(φ):66; Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; Number of Bearings:Double; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] 201; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; |
| FAG 517740 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Manufacturer Name:NTN; d:55 mm; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:7.82 Hz; da max:69 mm; Da max:111 mm; Mass (without HJ ring):1.44 kg; Dynamic load, C:137 kN; Characteristic outer ring frequency, BPF0:5.18 Hz; Nlim (oil):6,300 rpm; |
| Rolling Mills 800115A BEARINGS FOR METRIC AND INCH SHAFT SIZES | Size Standard:Metric System; Load Direction:Radial; RoHS:6; d:2; Sealing Structure:Double steel plate s; Lubricant:Clean Grease; Bearing Style:Double Shielded; Basic Load Rating Dynamic Rating(N):470; Revolution Frequency(rpm):26000; Rolling Element Material:Stainless Steel; |
| FAG 61964M.C3 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Type:Lock Nut; Volume Discount:Available; Sales Unit:Low Quantity (can be; Shape:Round shape; Surface Treatment:Surface Treatment; Screw Type:Metric (fine) Thread; Material:[Steel] 1018 Carbon; |
| Rolling Mills NNU4944S.M.P53 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Category:Take Up Units; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:1.554; Product Group:M06110; Component Description:Take Up Bearing Only; Rolling Element:Ball Bearing; Housing Style:Unit Only; Mounting Method:Set Screw; Compatible Take Up Frame:Not Specified; Adjustment Travel Length:0; Insert Part Number:UG223NL; Housing Material:Cast Iron; Other Features:Single Row | Spherical | Standard Duty | Wide Inner Race | Standard Slot | One Lip Seal; |
| Rolling Mills 22910E BEARINGS FOR METRIC AND INCH SHAFT SIZES | Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; Width T(mm):35; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Height H(mm):40 ～ 60; Seals:VV (Non-Contact Rubb; Number of Bearings:Single; |
| FAG 514461 BEARINGS FOR METRIC AND INCH SHAFT SIZES | T min.:-40 °C; Recommended tightening torque for set screw:16.8 Nm; T max.:100 °C; J:202 mm; H:238 mm; B:53.7 mm; Designation of bearing:US212-36G2T04; s1:26.85 mm; Weight:3.54 kg; A1:16 mm; |
| Rolling Mills 536586 BEARINGS FOR METRIC AND INCH SHAFT SIZES | Max operating temperature, Tmax:110 °C; Nlim (grease):13,000 rpm; da max:32 mm; Dynamic load, C:14 kN; Nlim (oil):15,000 rpm; Min operating temperature, Tmin:-25 °C; Radial clearance class:C3; Fatigue limit load, Cu:0.36 kN; Characteristic rolling element frequency, BSF:4.71 Hz; B:15 mm; |
| Rolling Mills 24032S.M BEARINGS FOR METRIC AND INCH SHAFT SIZES | B - Cone Width:33.000 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:55100 N; Bearing Weight:2.4 Kg; r - Cup Backface To Clear Radius2:2.54 mm; C - Cup Width:23.000 mm; da - Cone Frontface Backing Diameter:80.01 mm; Ab - Cage-Cone Frontface Clearance:5.3 mm; Cone Part Number:X31313M; db - Cone Backface Backing Diameter:96.01 mm; D:140.000 mm; |
| Rolling Mills 24030S.M BEARINGS FOR METRIC AND INCH SHAFT SIZES | Bearing Part Number:6201; Bearing I.D. d(mm):12; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):56; Shape:Flange Type; Flange Shape:Round Type; Bearing Retained:Yes (with retaining; Width T(mm):30 ～ 70; Type:Bearings with Housin; |